Do you know the steps for using silicone weather resistant sealant

Silicone weather resistant sealant is a commonly used adhesive in households, mainly composed of sodium silicate, acetic acid, and organic silicone.
1. Can use a glue gun;
2. Determine the width of the glue application, that is, the gap width;
3. Cut the glue nozzle into a smaller diameter than the gap according to the width of the glue gap;
4. Do a good job of protecting both sides of the adhesive gap. Apply 2-3CM adhesive paper on the glass, profiles, stones, etc. on both sides of the gap to protect the glass, profiles, stones, etc. on both sides, and it is also very convenient for correcting the adhesive inside the gap;
5. Master the speed of glue application and the speed of glue gun movement, and move the glue gun evenly according to the depth of the gap;
6. Trim the bonding area, find a shovel to scrape the uneven areas flat, and fill the gaps that were not penetrated during bonding;
7. After waiting for 48 hours, remove the adhesive tape on both sides of the material to complete the construction.
The above are the steps for using silicone weather resistant sealant, hoping to be helpful to everyone.